X-ZL07 series Cantilever Tension Sensor
X-ZL07 series Cantilever Tension Sensor
It is designed for installation equipment of single-side cantilever roller. It can be installed horizontally or vertically on the device, and no need for tension rollers. used to measure and control the tension of materials during processing, such as paper, label, tape, battery electrode, high performance film and other narrow materials.
Category
X-ZL07 series Cantilever Tension Sensor
Features
● Easy to install with various installation modes;
● Detection signal is not affected by theposition of the coil;
● Built-in new mechanical 10 times anti-overload protection;
● Minor temperature drift,good non-linearity and repeatability;
● Special surface treatment process on the roller, no damage to raw materials;
● Standard M12*1 plug
Description
XJC-ZL07 series cantilever tension sensor is designed for installation equipment of single-side cantilever roller. It can be installed horizontally or vertically on the device, and no need for tension rollers. It can be used to measure and control the tension of materials during processing, such as paper, label, tape, battery electrode, high performance film and other narrow materials . The sensor’s detection signal will not be affected by the position of the coil on the roller. Accurate and stable signal with resistance strain formula principle. Each sensor is verified by high and low temperature to ensure performance.
Technical Parameter
| Rated output | 1.0±10%mV/V | Non-linearity | 0.5% F.S. |
| Repeatability | 0.1%F.S. | Zero balance | ±2% F.S. |
| Operating temp range | -20~80°C | Compensated temp range | -10~40°C |
| Temp effect on zero | 0.02%F.S/°C | Insulation | ≥2000MΩ/100VDC |
| Recommended excitation voltage | 5~10VDC | Limit load | 300%F.S. |
| Cable size | φ5x5m | Protection class | IP65 |
Dimensions
Naming Rules
