X-T30 Transmitter
X-T30 Transmitter
The tension transducer converts mV output signal of tension sensors into analog signal digital signal in real time, and provide closed loop control for PLC, servo drive, IPC and other control systems.It adopts guide rail type installation. With built-in digital display, tension is displayed in real time. It is convenient for rapid tension reset and alarm output with switching I/O nodes.
Category
X-T30 Transmitter
Features
●Analog input/output: CH-1/CH-2
●Switching input/output: CH-2/CH-2
●Reset: switch input, clear command, panel reset,automatic zero clearing when power.
●Analog transmission: 0-10V，±10V，4-20mA，1-10V
●Digital output: RS232，RS485
●Protocol: MODBUS-RTU,TC-ASCII
●Analog transmission range: -100% – +100%FS
Description
The tension transducer converts millivolt output signal of tension sensors into analog signal or digital signal in real time, and provide closed loop control for PLC, servo drive, IPC and other control systems.The transducer adopts guide rail type installation. With built-in digital display, tension can be displayed in real time. It is convenient for rapid tension reset and alarm output with switching input and output nodes.
Technical Parameter
| Power supply | DC24V/5W | AD resolution | 24 bit |
| Sensor’s supply voltage | 5VDC,200mA | Sampling rate | 480-1920 Times/Sec. |
| Input signal range | 0-20mV | Transmitting speed | =Sampling rate |
| Non-linearity | 0.03%F.S. | Switch output type & capacity | NPN/PNP,500mA |
| Accuracy | 0.03%F.S. | Switch input type | NPN |
Dimensions
Selection
| Model | Input signal | Power supply | Signal output | Special requirements |
| XJC-T300F | M:mV
|
D:24VDC | R2: RS232,
R4: RS485, V:0-10V(±10V,1-10V) A:4-20mA
|
Y/N |
