X-B150 Series
X-B150 Series
Sensors are used to monitor the pressure value when pressing down and holding pressure in real time, to ensure that the pressure value is consistent and in line with the process requirements. Avoid too much or little pressure value resulting in cell damage or loose cell and other problems. High-precision flat type sensors, spoke type sensors and thin planar pressure sensors are generally chosen.
Category
X-B150 Series
Features
● Non-standard customization of size and range, various types;
●High precision, single-point calibration can meet the requirements;
●High side load tolerance;
●The deformation of the load cell is small;
●High dynamic response frequency;
Technical Parameter
| Material | Stainless steel | Rated output | 2.0±10%mV/V |
| Zero balance | ±2%F.S. | Non-linearity | 0.2%F.S. |
| Hysteresis | 0.2%F.S. | Repeatability | 0.1%F.S. |
| Creep(30 min) | 0.2%F.S. | Temp effect on output | 0.05%F.S./10°C |
| Temp effect on zero | 0.05%F.S./10°C | Input impedance | 1080±30Ω |
| Output impedance | 1000±5Ω | Insulation | ≥5000MΩ/100VDC |
| Recommended excitation | 5-10VDC | Maximum excitation | 15VDC |
| Compensated temp range | -10~40°C | Operating temp range | -20~80°C |
| Limit load | 150% | Breaking load | 200% |
| Cable size | φ5×4m | Life | Full scale more than 1 million times |
| Cable Connection | Ex+: Red；Ex-: Black；Sig+: Green；Sig-: White | ||
Dimensions
| Capacity | 5T | 10T | 15T | 20T | 25T | 30T |
Load Direction & Wiring Code
Applications
Application: sensors are used to monitor the pressure value when pressing down and holding pressure in real time, to ensure that the pressure value is consistent and in line with the process requirements. Avoid too much or too little pressure value resulting in cell damage or loose cell and other problems. High-precision flat type sensors, spoke type sensors and thin planar pressure sensors are generally chosen.
