X-L08 Series

Sensors are used to monitor the pressure value when pressing down and holding pressure in real time, to ensure that the pressure value is consistent and in line with the process requirements. Avoid too much or little pressure value resulting in cell damage or loose cell and other problems. High-precision flat type sensors, spoke type sensors and thin planar pressure sensors are generally chosen.

Category

X-L08 Series

Features

● Stainless steel material,with sealed welding oil-proof,

waterproof and corrosion-resistant, can work in harsh environments

●S-type structural design,pressure bearing,easy to install

●High dynamic response frequency,high-precision

Technical Parameter

Material	Alloy steel/stainless steel	Rated output	2.0±10%mV/V
Zero balance	±2%F.S.	Non-linearity	0.05%F.S.
Hysteresis	0.05%F.S.	Repeatability	0.05%F.S.
Creep(30 min)	0.05%F.S.	Temp effect on output	0.05%F.S./10°C
Temp effect on zero	0.05%F.S./10°C	Input impedance	750±50Ω
Output impedance	700±10Ω	Insulation	≥5000MΩ/100VDC
Recommended excitation	5-10VDC	Maximum excitation	15VDC
Compensated temp range	-10~40°C	Operating temp range	-20~80°C
Limit load	150%	Breaking load	200%
Cable size	φ4×4m	Life	Full scale more than 1 million times
Cable Connection	Ex+: Red；Ex-: Black；Sig+: Green；Sig-: White

Dimensions

Load Direction & Wiring Code

Applications

Application: sensors are used to monitor the pressure value when pressing down and holding pressure in real time, to ensure that the pressure value is consistent and in line with the process requirements. Avoid too much or too little pressure value resulting in cell damage or loose cell and other problems. High-precision flat type sensors, spoke type sensors and thin planar pressure sensors are generally chosen.