X-ZL18 Series Shaft Head Tension Sensor
X-ZL18 Series Shaft Head Tension Sensor
It is designed with cantilever mounting structure, which is suitable for measuring the tension of thread and cablet in narrow space. It is designed with threaded structure with two thin nuts. It is installed vertically on the device body or on the mounting plate by clamping nuts. Accurate and stable signal with resistance strain formula principle. By high&low temperature to ensure performance.
Category
X-ZL18 Series Shaft Head Tension Sensor
Features
● Easy to install;
● High measurement accuracy;
● Low tension conditions can also be accurately measured;
● Built-in new mechanical 10 times anti-overload protection;
● Minor temperature drift,good non-linearity and repeatability;
● Small size, little space required for installation;
Description
XJC-ZL18 series shaft head tension sensor is designed with cantilever mounting structure, which is suitable for measuring the tension of thread and cablet in narrow space. The series is designed with threaded structure with two thin nuts. It can be installed vertically on the device body or on the mounting plate by clamping nuts. Accurate and stable signal with resistance strain formula principle. Each sensor is verified by high and low temperature to ensure performance.
Technical Parameter
| Rated output | 1.0±10%mV/V | Non-linearity | 0.2% F.S. |
| Repeatability | 0.1%F.S. | Zero balance | ±2% F.S. |
| Operating temp range | -20~80°C | Compensated temp range | -10~40°C |
| Temp effect on zero | 0.02%F.S/°C | Insulation | ≥2000MΩ/100VDC |
| Recommended excitation voltage | 5~10VDC | Limit load | 1000%F.S. |
| Cable size | φ4x5m | Protection class | IP65 |
| Cable connection | Exc+:Red; Exc-:Black; SIG+Green; SIG-: White | ||
Dimensions
