X-ZL13 Series Through-hole type Tension Sensor
X-ZL13 Series Through-hole type Tension Sensor
It is a very accurate sensor to measure the tension of shaft. Accurate and stable signal with resistance strain formula principle. Compact structure and little deformation. Each sensor is verified by high and low temperature to ensure performance. Built-in new mechanical 10 times anti-overload protection. Low thickness design, suitable for narrow mechanical frames.
Category
X-ZL13 Series Through-hole type Tension Sensor
Features
● Compact structure, easy to install;
● Can be installed directly inside or outside the machine frame;
● Wide range;
● Built-in new mechanical 10 times anti-overload protection;
● Minor temperature drift,good non-linearity and repeatability;
● Self-aligning shaft which can compensate installation error;
● Standard M12*1 plug;
● Stainless steel material;
Description
XJC-ZL13 series Through-hole type tension sensor is a very accurate sensor to measure the tension of shaft. Accurate and stable signal with resistance strain formula principle. Compact structure and little deformation. Each sensor is verified by high and low temperature to ensure performance. Built-in new mechanical 10 times anti-overload protection. Low thickness design, suitable for narrow mechanical frames.
Technical Parameter
| Rated output | 1.5±0.2%mV/V | Non-linearity | 0.3% F.S. |
| Repeatability | 0.15%F.S. | Zero balance | ±2% F.S. |
| Operating temp range | -20~80°C | Compensated temp range | -10~40°C |
| Temp effect on zero | 0.02%F.S/°C | Insulation | ≥2000MΩ/100VDC |
| Recommended excitation voltage | 5~10VDC | Limit load | 1000%F.S. |
| Cable size | φ5x5m | Protection class | IP65 |
Dimensions
Force calculation
Installation
